**In this post we announce what we've been working on for the last couple of months: an alternative command line interface to EOS, aimed to be the foundation for future development tools for the EOS ecosystem. We also announce the creation of a public endpoint for accessing EOS testnet.** ![teos.png](https://steemitimages.com/DQmbigcPSPFHfQHS2i798qXGfcj4g8cyt3f6DzNz7DdJBxj/teos.png) ## Rationale For those less familiar with EOS codebase, `eosc` is the official CLI (Command Line Interface) for EOS. It interacts with the EOS blockchain by connecting to a full node called `eosd`, which can run either locally or on a remote server. When working with EOS smart-contracts, we've found that `eosc` has some inconvenient limitations: * Firstly, it's quite heavyweight in terms of external dependencies, as it's tightly connected to the entire EOS codebase. * Secondly, it's not ready to be used in Windows environment. * And finally, it's hard to use `eosc` programmatically, as it doesn't offer an API. It could be enough for us to develop a minimal C++ library acting as an EOS API and this way implement all the commands supported by `eosc`. However, it was a short step to provide such a library with a command line interface, and thus create a full-blown `eosc` replacement, which we've named `teos`. Here are the benefits of using `teos` instead of `eosc`: * With `teos` you can do everything available in `eosc` and much more, as we've added a richer & more useful command option list. * Also, as `teos` is not dependent on the entire EOS codebase, it can be easily compiled on any platform, including Windows, which is not the case with `eosc`. * And last but not least, `teos` has an underlying library which offers a proper API which you can use to interact programmatically with `eosd` (EOS full node). For obvious reasons everything we do is open source. The source code of `teos` is located in [this repository](https://github.com/tokenika/teos). Note: To make our project fully cross-platform (including Windows), we needed to clone and modify some of the support libraries from the EOS codebase. For more details please refer to [this document](https://github.com/tokenika/teos/blob/master/EOS_LIBS_AMENDMENTS.md). ## The ultimate goal Our plans include opening up EOS for smart-contract development on any platform, including Windows. Once we're finished building the underlying API, `teos` will be an excellent starting point for creating a truly cross-platform set of development tools, including a smart-contract deployment framework similar to Ethereum's [Truffle](http://truffleframework.com/). ## Public endpoint As `teos` is foremost an EOS client, this announcement includes opening up Tokenika's publicly accessible endpoint as a gateway for trying out EOS and the official testnet without the trouble of running your own full node. This endpoint can be accessed no matter if you're going to use `eosc`, the official CLI, or `teos`, our alternative. Our endpoint is available at [eos-testapi.tokenika.io](http://eos-testapi.tokenika.io/). It's not only fully featured, general purpose API but also has wallet API enabled for testing purposes - this should never be done on production! It is all for you to use it, test it, brake it. We want to be aware of all possible flaws before the end of the testing period. Our endpoint is connected to the official EOS testnet. Here are the details: * API: [eos-testapi.tokenika.io:8888](http://eos-testapi.tokenika.io:8888/) * P2P: [eos-testp2p.tokenika.io:9876](http://eos-testp2p.tokenika.io:9876/) (or [p2p-testnet1.eos.io:9876](http://p2p-testnet1.eos.io:9876/), if you want to use the official one) For endpoint configuration please refer to [this document](https://github.com/tokenika/teos/blob/master/ENDPOINT_CONFIGURATION.md). Disclaimer: Use it at your own risk and when you really know what are you doing. Do not store any key material that has or will have any value in future. ## Comparison As it was mentioned above, `teos` covers the same functionality as `eosc`, but it's more user friendly and offers a wider selection of options. Let's take a look at the `get block` command and the response `eosc` gives regarding its options: ``` ./eosc get block --help ``` #### ``` ERROR: RequiredError: block Retrieve a full block from the blockchain Usage: ./eosc get block block Positionals: block TEXT The number or ID of the block to retrieve ``` #### A similar command in `teos` will produce something like this: ``` ./teos get block --help ``` #### ``` Retrieve a full block from the blockchain Usage: ./teos get block [block_num | block_id] [Options] Usage: ./teos get block [-j "{"""block_num_or_id""":"""int | string"""}"] [OPTIONS] Options: -n [ --block_num ] arg Block number -i [ --block_id ] arg Block id -h [ --help ] Help screen --wallet-host arg (=localhost) The host where eos-wallet is running --wallet-port arg (=8888) The port where eos-wallet is running -V [ --verbose ] Output verbose messages on error -j [ --json ] arg Json argument -v [ --received ] Print received json -r [ --raw ] Raw print -e [ --example ] Usage example ``` #### Now, let's consider using the `get block` command in `eosc`: ``` ./eosc get block 25 ``` #### ``` { "previous": "00000018b5e0ffcd3dfede45bc261e3a04de9f1f40386a69821780e063a41448", "timestamp": "2017-11-29T09:50:03", "transaction_merkle_root": "0000000000000000000000000000000000000000000000000000000000000000", "producer": "initf", "producer_changes": [], "producer_signature": "2005db1a193cc3597fdc3bd38a4375df2a9f9593390f9431f7a9b53701cd46a1b5418b9cd68edbdf2127d6ececc4d66b7a190e72a97ce9adfcc750ef0a770f5619", "cycles": [], "id": "000000190857c9fb43d62525bd29dc321003789c075de593ce7224bde7fc2284", "block_num": 25, "refBlockPrefix": 623236675 } ``` #### A similar command in `teos` will produce a response which is less verbose by default, thus more readable: ``` ./teos get block 25 ``` #### ``` ## block number: 25 ## timestamp: 2017-11-29T09:50:03 ## ref block prefix: 623236675 ``` #### But you can make it verbose, if you need: ``` ./teos get block 25 --received ``` #### ``` { "previous": "00000018b5e0ffcd3dfede45bc261e3a04de9f1f40386a69821780e063a41448", "timestamp": "2017-11-29T09:50:03", "transaction_merkle_root": "0000000000000000000000000000000000000000000000000000000000000000", "producer": "initf", "producer_changes": "", "producer_signature": "2005db1a193cc3597fdc3bd38a4375df2a9f9593390f9431f7a9b53701cd46a1b5418b9cd68edbdf2127d6ececc4d66b7a190e72a97ce9adfcc750ef0a770f5619", "cycles": "", "id": "000000190857c9fb43d62525bd29dc321003789c075de593ce7224bde7fc2284", "block_num": "25", "refBlockPrefix": "623236675" } ``` #### Furthermore, you can make it both verbose and unformatted: ``` ./teos get block 25 --received --raw ``` #### ``` {"previous":"00000018b5e0ffcd3dfede45bc261e3a04de9f1f40386a69821780e063a41448","timestamp":"2017-11-29T09:50:03","transaction_merkle_root":"0000000000000000000000000000000000000000000000000000000000000000","producer":"initf","producer_changes":"","producer_signature":"2005db1a193cc3597fdc3bd38a4375df2a9f9593390f9431f7a9b53701cd46a1b5418b9cd68edbdf2127d6ececc4d66b7a190e72a97ce9adfcc750ef0a770f5619","cycles":"","id":"000000190857c9fb43d62525bd29dc321003789c075de593ce7224bde7fc2284","block_num":"25","refBlockPrefix":"623236675"} ``` #### Also, you can supply the arguments in *json* format: ``` ./teos get block --json '{"""block_num_or_id""":"""56"""}' ``` #### ``` ## block number: 56 ## timestamp: 2017-11-29T10:02:18 ## ref block prefix: 273573026 ``` #### And finally, for each command you can invoke an example showcasing its usage: ``` ./teos get block --example ``` #### ``` // Invoke GetInfo command ptree getInfoJson; GetInfo getInfo(getInfoPostJson); cout << getInfo.toStringRcv() << endl; /* output: { "server_version": "9703495c", "head_block_num": "1707240", "last_irreversible_block_num": "1707225", "head_block_id": "001a0ce87ca6e2d0fc19b8a02e9241c658bea0365f4e6f035ce6602db04611bd", "head_block_time": "2017-12-25T14:11:31", "head_block_producer": "inito", "recent_slots": "1111111111111111111111111111111111111111111111111111111111111111", "participation_rate": "1.00000000000000000" } */ // Use reference to the last block ptree GetBlockJson; GetBlock_poGetBlockJsont_json.put("block_num_or_id", getInfo.get("last_irreversible_block_num")); // Invoke GetBlock command GetBlock GetBlock(GetBlock_post_json); cout << GetBlock.toStringRcv() << endl; /* output: { "previous": "001a0cd8422216f2828ef5056e9371439f80665cee99d72a5f3162ae7c0495fd", "timestamp": "2017-12-25T14:11:16", "transaction_merkle_root": "0000000000000000000000000000000000000000000000000000000000000000", "producer": "initn", "producer_changes": "", "producer_signature": "1f382b4fe716f683c8a7ebd15fe5f5266c75a24f75b9b212fc3cc3f7db11f5258b08e5aebc7680784c240e0f8d0ea7540dfb4ab8dcbe5cd8b492876e8f59bb4ea8", "cycles": "", "id": "001a0cd98eb6f7e0f8e7803b098082b35f1348672561af193ead3d1b1a281bcf", "block_num": "1707225", "ref_block_prefix": "998303736" } */ ``` ## Using `teos` as EOS API In our view, the real value of our efforts is actually the library that's behind `teos`. As we mentioned before, the `teoslib` library acts as a full-blown API for EOS. Let's consider a code snippet illustrating its usage: ``` #include #include #include #include #include "teoslib/teos_get_commands.hpp" int main() { using namespace tokenika::teos; teosCommand::host = TEST_HOST; teosCommand::port = TEST_PORT; ptree getInfoJson; // Invoke GetInfo command: GetInfo getInfo(getInfoJson); cout << getInfo.toStringRcv() << endl; if (getInfo.isError()) { return -1; } ptree getBlockJson; // Use reference to the last block: getBlockJson.put("block_num_or_id", getInfo.get("last_irreversible_block_num")); // Invoke GetBlock command: GetBlock getBlock(getBlockJson); cout << getBlock.toStringRcv() << endl; if (getBlock.isError()) { return -1; } return 0; } ``` #### Here is the outcome of the above code: ``` { "server_version": "9703495c", "head_block_num": "1707240", "last_irreversible_block_num": "1707225", "head_block_id": "001a0ce87ca6e2d0fc19b8a02e9241c658bea0365f4e6f035ce6602db04611bd", "head_block_time": "2017-12-25T14:11:31", "head_block_producer": "inito", "recent_slots": "1111111111111111111111111111111111111111111111111111111111111111", "participation_rate": "1.00000000000000000" } { "previous": "001a0cd8422216f2828ef5056e9371439f80665cee99d72a5f3162ae7c0495fd", "timestamp": "2017-12-25T14:11:16", "transaction_merkle_root": "0000000000000000000000000000000000000000000000000000000000000000", "producer": "initn", "producer_changes": "", "producer_signature": "1f382b4fe716f683c8a7ebd15fe5f5266c75a24f75b9b212fc3cc3f7db11f5258b08e5aebc7680784c240e0f8d0ea7540dfb4ab8dcbe5cd8b492876e8f59bb4ea8", "cycles": "", "id": "001a0cd98eb6f7e0f8e7803b098082b35f1348672561af193ead3d1b1a281bcf", "block_num": "1707225", "ref_block_prefix": "998303736" } ``` ## List of currently supported commands At this very initial stage of our project, we haven't ported all the commands available in `eosc`. Below is the list of commands `teos` supports in this release: ``` version client get info get block get account get code get table create key wallet create wallet list wallet keys wallet import wallet open wallet lock wallet lock all wallet unlock ``` ## Building on Ubuntu 16.04 #### Dependencies If you are on Ubuntu, the only thing you need to do is have the EOS codebase complied and installed. Just follow the instructions listed in [the official EOS repository](https://github.com/EOSIO/eos). We don't really need any of the code contained there, however we recommend to make use of the fact that EOS automated build script sorts out all the external dependencies (i.e. [Boost](http://www.boost.org/), [OpenSSL](https://www.openssl.org/), [GMP](https://gmplib.org/) & [Secp256k1](https://github.com/bitcoin-core/secp256k1)) that `teos` requires. And, unless you want to use our remote server for this purpose, you will need a locally running EOS full node anyway to play with `teos`, so no effort is actually wasted. What you will also need is `cmake` version 3.8 or higher. You can verify it using this command: ``` cmake --version ``` #### If your `cmake` is lower than 3.8, run this command to remove it: ``` sudo apt-get purge cmake ``` #### And then run these commands to build it from the source code: ``` version=3.8 build=0 wget https://cmake.org/files/v$version/cmake-$version.$build.tar.gz tar -xzvf cmake-$version.$build.tar.gz cd cmake-$version.$build ./bootstrap make -j4 sudo make install cd .. && rm -rf cmake-$version.$build ``` #### When the build process is complete, open a new terminal window and make sure `cmake` is actually version 3.8: ``` cmake --version ``` #### Cloning the source code Navigate to a location of your choice and clone *teos* repository: ``` git clone https://github.com/tokenika/teos.git ``` #### Compilation Navigate to the `teos/teos` folder and create a new folder named `build`: ``` cd teos/teos mkdir build && cd build ``` #### Run CMake: ``` cmake .. ``` #### Make sure there are no errors, and then proceed with the actual compilation: ``` make install ``` #### As the result of the compilation, you should be able to find those two files in the `install` folder: * `lib/libteoslib.a` is a static library acting as an API for EOS * `bin/teos` is the CLI executable making use of the above library #### Testing on remote sever Open a terminal window, navigate to the `install/bin` folder and run `teos`: ``` ./teos eos-testapi.tokenika.io:8888 get info ``` #### The above command will connect to EOS full node running on one of our testnet servers. Alternatively, you can use the predefined placeholder `tokenika` instead of `eos-testapi.tokenika.io:8888`: ``` ./teos tokenika get info ``` #### You can try simple queries, e.g. ``` ./teos tokenika get block 25 ``` #### ``` ## block number: 25 ## timestamp: 2017-12-05T19:55:56 ## ref block prefix: 1139663381 ``` #### Or you can test private key generation: ``` ./teos tokenika create key ``` #### ``` ## key name: default ## private key: 5JyL28JPQbPTYwTpjKRcXvfj6nwUKgCmHnJaD28nmmWMpHXukVn ## public key: EOS7TxBhoCwAWXoV8uhtgjz4inTLwiwcySvrVhGNYcjhw75wFJ9uA ``` #### Testing on localhost If you have complied the entire EOS codebase and have `eosd` running on your local machine, you can also test `teos` locally: ``` ./teos localhost get info ``` #### Or just: ``` ./teos get info ``` ## Building on Windows 10 #### Prerequisites We assume that your computer is 64bit. We also assume that you have [Git 2.15.1](https://git-scm.com/downloads), [CMake 3.10.1](https://cmake.org/download/) and [MS Visual Studio 2017](https://www.visualstudio.com/downloads/) installed. If not, please follow the instructions available in the above links. As far as Visual Studio is concerned, you will only need the most basic module called *Universal Windows Platform Development* (and from optional tools *C++ Universal Windows Platform Tools*). #### Dependencies For most of its functionality `teos` is only dependent on [Boost](http://www.boost.org/). However, because it also needs to able to generate private keys, additionally `teos` is dependent on [OpenSSL](https://www.openssl.org/), [GMP](https://gmplib.org/) and [Secp256k1](https://github.com/bitcoin-core/secp256k1), as specified in EOS documentation. On Windows the main difficulty is to have all those dependencies as Windows-compiled libraries. Advanced Windows users might want to build everything from source files (it's certainly doable) and ultimately we will aim for that. However, at this stage we recommend using pre-compiled binaries: - [Boost](http://www.boost.org/) version 1.64 (not higher as it might be incompatible with CMake) - Windows binaries are available [here](https://sourceforge.net/projects/boost/files/boost-binaries/1.64.0/) (for a 64bit machine select `boost_1_64_0-msvc-14.1-64.exe`). - Define an environment variable `BOOST_INCLUDEDIR` pointing to the location you've chosen to store the Boost libraries (e.g. `C:\Local\boost_1_64_0`). - Define an environment variable `BOOST_LIBRARYDIR` pointing to the `lib64-msvc-14.1` folder inside the location you've chosen to store the Boost libraries (e.g. `C:\Local\boost_1_64_0\lib64-msvc-14.1`). - [OpenSSL](https://www.openssl.org/) version 1.1.0 - Windows binaries are available [here](https://slproweb.com/products/Win32OpenSSL.html) (for a 64bit machine select `Win64OpenSSL-1_1_0g.exe`). - Run the installer and when prompted choose to copy the DLLs to the `bin` directory. - Define an environment variable `OPENSSL_ROOT_DIR` pointing to the location you've chosen to store the OpenSLL libraries (e.g. `C:\Local\OpenSSL-Win64`). - [GMP](https://gmplib.org/) version 4.1 (Please note that [MPIR](http://www.mpir.org/downloads.html) may be considered as a good Windows-ready alternative to GMP, as described [here](https://stackoverflow.com/questions/47359417/how-to-compile-gmp-for-windows-using-visual-studio.). In a future release of `teos` we will probably switch to MPIR, as it seems to be better suited for Windows). - Window binaries are available [here](https://cs.nyu.edu/~exact/core/gmp/index.html) (choose static ones for MinGW, i.e. `gmp-static-mingw-4.1.tar.gz`). You might need [7-Zip](http://www.7-zip.org/) to extract them. - Define an environment variable `GMP_DIR` pointing to the location you've chosen to store the GMP libraries (e.g. `C:\Local\gmp-static-mingw-4.1`). - Inside `GMP_DIR` navigate to the `lib` folder and rename `libgmp.a` to `gmp.lib` to match Windows conventions. - [Secp256k1](https://github.com/bitcoin-core/secp256k1) - as there are no pre-compiled binaries available what you'll need to do is cross-compilation between Linux and Windows. This will be described in the next section. But first do these preliminary steps: - Create a location of your choice where Secp256k1 libraries will be stored. In our case it's `C:\Local\secp256k1`. - Define an environment variable `SECP256K1_DIR` pointing to the above directory. #### Secp256k1 cross-compilation [Secp256k1](https://github.com/bitcoin-core/secp256k1) is not available directly on Windows, so the only way to go is apply cross-compilation between Linux and Windows. For this purpose, you'll need access to a Linux environment. In our view, the easiest option is using [Windows Subsystem for Linux](https://msdn.microsoft.com/en-us/commandline/wsl/about), and the rest of this section is based on this choice. If you haven't already done so, enable *Windows Subsystem for Linux* on your Windows machine, as described in [this guide](https://docs.microsoft.com/en-us/windows/wsl/install-win10). While on Windows, run Ubuntu bash and start with making sure you are running Ubuntu 16.04: ``` lsb_release -a ``` #### And before you continue, update & upgrade Ubuntu: ``` sudo apt update sudo apt upgrade ``` #### Make sure that you have these tools installed: ``` sudo apt install autoconf sudo apt install make sudo apt install libtool sudo apt install mingw-w64 ``` #### Get a copy of the `secp256k1` repository and navigate to its folder: ``` git clone https://github.com/cryptonomex/secp256k1-zkp.git cd secp256k1-zkp ``` #### Define an environment variable called `installDir`. Please note that its value needs to match the Windows destination for your *Secp256k1* libraries (in our case `C:\Local\secp256k1`), as described in the previous section. So probably you'll need to apply a different path than the one used below, unless you've chosen the same location as we did. ``` export installDir=/mnt/c/Local/secp256k1/ ``` #### And now you're ready to build and install *Secp256k1*: ``` ./autogen.sh ./configure --host=x86_64-w64-mingw32 --prefix=${installDir} make make install ``` #### Rename the `libsecp256k1` file to match Windows conventions: ``` mv ${installDir}/lib/libsecp256k1.a ${installDir}/lib/secp256k1.lib ``` #### Copy the `libgcc` library from Ubuntu to Windows: ``` cp /usr/lib/gcc/x86_64-w64-mingw32/5.3-posix/libgcc.a ${installDir}/lib/gcc.lib ``` #### And finally, copy the executable `tests` which will be used for testing: ``` cp tests.exe ${installDir}/tests.exe ``` #### Before you exit Ubuntu bash, you might want to clean the workspace: ``` cd .. && rm -rf secp256k1-zkp ``` #### Open *PowerShell*, navigate to `SECP256K1_DIR` (in our case it's `C:\Local\secp256k1`) and run `tests.exe` to make sure *Secp256k1* works properly on Windows: ``` cd C:\Local\secp256k1 ./tests.exe ``` #### Cloning the source code Open *Visual Studio 2017 Developer Command Prompt*, navigate to a location of your choice and clone *teos* repository: ``` git clone https://github.com/tokenika/teos.git ``` #### Compilation Still using *Visual Studio 2017 Developer Command Prompt*, navigate to the `teos\teos` folder and run the following commands: ``` cd teos\teos mkdir build && cd build cmake -G "Visual Studio 15 2017 Win64" .. msbuild teos.sln msbuild INSTALL.vcxproj ``` #### Testing on remote sever Open *Power Shell* and navigate to the location of your *teos* repository, and then inside the repository navigate to the `teos\install\bin` folder: ``` cd teos\install\bin ``` #### And now you should be able to run `teos` and access EOS full node running on one of our servers: ``` ./teos eos-testapi.tokenika.io:8888 get info ``` #### Alternatively, you can use the predefined placeholder `tokenika` instead of `eos-testapi.tokenika.io:8888`: ``` ./teos tokenika get info ``` #### You can try simple queries, e.g. ``` ./teos tokenika get block 25 ``` #### ``` ## block number: 25 ## timestamp: 2017-12-05T19:55:56 ## ref block prefix: 1139663381 ``` #### Or you can test private key generation: ``` ./teos tokenika create key ``` #### ``` ## key name: default ## private key: 5JyL28JPQbPTYwTpjKRcXvfj6nwUKgCmHnJaD28nmmWMpHXukVn ## public key: EOS7TxBhoCwAWXoV8uhtgjz4inTLwiwcySvrVhGNYcjhw75wFJ9uA ``` ## Conclusion We dare to hope that `teos` could become an interesting alternative to the original `eosc` CLI, and maybe one day be included as part of EOS codebase. To our knowledge this is the first fully cross-platform EOS client, and also a good foundation for an EOS API. In our subsequent release, we're going to cover the entire EOS API, so you'll be able to compile and deploy an EOS smart-contract on the testnet via our full node, and do it from any operating system, including Windows.

perduta