Hello Steemit friends, so recently I received a mechanical watch but it is way too big for my wrist, as you know all these mechanical watch was link together with small pin that is very hard to take out and resize. Normally people would just go to the watch shop and ask them to adjust it for free, but I want to try it myself instead, shouldnt be too hard right?
Luckily I found a plier, a hammer and a spring. so first thing I did was to use the plier to straighten the spring, then using the spring to push the tiny pin out, since the tiny pin is too hard to come out, so I used a hammer and smash the spring so that it push the tiny pin out. Once the tiny pin is out i can remove some chain from the watch and link them back by putting back the tiny pin
Of course this is just a small case but since this is the first time I try to resize it I feel a little accomplishment after doing it blindly and succeed.
thanks for reading
大家好，最近得到一个机械表，可是太大，又不能很轻松的把他的表带弄小，通常大家应该会把机械表带到表店叫店员帮忙弄小，可是我觉得这种小事难道自己弄很难吗？
于是我找到了鉗，锤子和弹簧，先用鉗把弹簧拉直，然后往小洞口里插，把里面的铁针挤出来，由于铁针太过难出来，我再用锤子把它打出来，铁针出来后，我就可以用这个铁针把其他的铁针对准再用锤子把它们打出来，然后把多余的表带取走，在把铁针打回去锁好表带
其实是小事，不过因为第一次乱来也成功所以有小小成就感
谢谢阅读